Anti Theft Cable Lock Kit

Cable Lock Kit – User Manual

How To Reset The Combination

The original dials 0-0-0-0, please do as the following steps to set your own combination:

Step 1: To make your lock to the open status, turn the dials to the correct combination to align with the combination notching line.

Cable Lock Side View

Step 2: Press down the reset button as the arrow direction by a small tool, and do not release it until you finish the next step.

Cable Lock Reset Tool

Step 3: Set your combination by turning the dials (eg. 5-5-5-5), and make sure they are aligned with the notching line.

IMPORTANT: The lock must be kept in this state all along during you are setting your new combination. Failure to do so could cause you to inadvertently set a random code instead of your specified code.

Cable Lock Notching Line

Step 4: Release the reset button. Now the setting is completed. If you need to reset the combination, please repeat steps 1-4. Please remember to write down the combination you set.

Testing The Combination

Before you lock the Notebook Computer:
Step 1: Turn the dials as random.
Step 2: Turn the correct combinations you set to align with the combination notching line.
Step 3: Check if the opening button can be stirring freely.

Specifications

Size: 55x20x18mm
Weight: 160.4g
Cable Length: 2000mm
Diameter: 5.0mm

Using the Right Spacer

Due to the variation in the size of the security slots on various notebook models, you may find that there is some slack between the lock and the computer. Then we provide 3 size spacers for your choice: 0.5mm, 1.0mm, 1.5mm.

Step 1: Insert your lock into the notebook. Pull the lock away from the notebook and observe for excessive gaps.
Step 2: Try each of the spacers to determine which one fits your computer. Upon determining which one you going to use, remove the adhesive strip from the back and put the spacer on the lock.

Cable Lock Spacer

How To Use The Combination Lock

Look for a stable and firm object, eg. Table, cabinet and so on. Take the looped end of the cable and wrap it around the selected object.

Cable Lock Attaching

How To Lock

Step 1: Turn your own code to the combination notching line.
Step 2: Turn the opening button to the position “Unlock Icon” and insert the lock to the computer’s lock slot, and loose the opening button to the position “Lock Icon”

How To Unlock

Tip: Do not attempt to remove the lock by force without using the correct combination. Or else, your notebook will be damaged.
Step 1: Turn your own combinations to the combination notching line.
Step 2: Stirring the opening button to the unlock position, you can pull out the lock from your notebook.

Tip: Do not attempt to remove the lock by force without using the correct combination. Or else, your notebook will be damaged.

Combination Notching Line

Combination Notching Line Close Up

Please make sure the code is aligned with the notching line. And read the combination from left to right.

Tips & Best Practices

  • To avoid damaging your computer, do not try to pull out the locking device by force without using the correct combination.
  • Remember the combination you set, we can not settle out the problems taken to you due to the combinations missed.
  • ChargeTech reserves the right to amend the specifications, characters of any product without prior warning.

Watch the video tutorial on how to set up your Anti-Theft Cable Lock Kit here: https://www.youtube.com/watch?v=c3tvxbFTQrQ

Have more questions? Submit a request

Comments

0 comments

Please sign in to leave a comment.